Micromod Micro-DCI: 53MC5000 Multi-Loop Process Controller FLEXIBLE CONTROL STRATEGIES - Manual (Page 65)

2.7.41 STATUS DISPLAY 0 LOADER
The Status Display 0 (SDT0A-0H) Loader module allows FCS logic signals to be tied to SDT0 so
that configured messages can be displayed that reflect conditions of PCS operation. The ten char-
acter display message (LABLE) is configured with attributes (e.g., flashing, reverse video, etc.) us-
ing the SDT0 parameters listed in the table that follows. The
POINTS TO column in the table is
used to list the monitored input L-values from the other FCS modules that are wired to the SDT0A-
0H B-datapoints. An illustration of the SDT0 module follows the table.
Status Display 0 Module Parameters
LEGEND POINTER POINTS TO STATE ALARM
ENABLE
MODE LABLE ALARM
ACKNOW-
LEDGE
MODIFY
DISABLE
SDT-0A B111 L L336 L368 L352 A054 L384 L320
SDT-0B B112 L L337 L369 L353 A055 L385 L321
SDT-0C B113 L L338 L370 L354 A056 L386 L322
SDT-0D B114 L L339 L371 L355 A057 L387 L323
SDT-0E B115 L L340 L372 L356 A058 L388 L324
SDT-0F B116 L L341 L373 L357 A059 L389 L325
SDT-0G B117 L L342 L374 L358 A060 L390 L326
SDT-0H B118 L L343 L375 L359 A061 L391 L327
FCS 53MC5000 Flexible Control Strategies
2-58
STAT0