Micromod Micro-DCI: 53MC5000 Multi-Loop Process Controller FLEXIBLE CONTROL STRATEGIES - Manual (Page 17)

2.7.3 ANALOG INPUT LOADER
The Analog Input (ANI0-8) Loader module maps the ANI outputs into the FCS program. The out-
put signal is the numeric value in engineering units after all signal conditioning has been applied.
The table that follows lists the ANI0-8 outputs and the parameters that affect those outputs. An il-
lustration of the ANI0-8 module follows the table. See Section 5, Configuration Parameters, of IB
53MC5000, Revision 2, for a description of the ANI parameters.
ANI0-8 Module Parameters
ANI SPAN ZERO DFILT NOBIAS SQRT OUTPUT
ANI0 C256 C276 B269 L416 L440 C020
ANI1 C257 C277 B270 L417 L441 C021
ANI2 C258 C278 B271 L418 L442 C022
ANI3 C259 C279 B272 L419 L443 C023
ANI4 C260 C280 B273 L420 L444 C024
ANI5 C261 C281 B274 L421 L445 C025
ANI6 C262 C282 B275 L422 L446 C026
ANI7 C263 C283 B276 L423 L447 C027
ANI8 C264 C284 B277 L424 L448 C028
FCS 53MC5000 Flexible Control Strategies
2-10
ANALOGIN