Luminex 100 IS User Manual, Version 2.1 - Manual (Page 99)

x MAP Technology Software Tour
PN 89-00002-00-070 Rev. A 7 - 35
Figure 66. Import Template Dialog Box
3. Select your floppy disk drive as the Look in location.
4. The kit manufacturer’s template appears on the selection list.
Click the name of the template.
5. Click Open. The template is now loaded and available for use.
You can import templates from other areas within your computer
such as another drive or a CD ROM. To select a different location
using the Look in drop down box, click the drop down arrow.
Before you can build a batch, you must enter lot information for the
reagents that you want to use in the batch.
Lots
Create New Lots ‹ To create a new lot:
1. Click New Lot from the Home tab. An Open Template dialog
box appears.
Figure 67. Open Template For New Lot Dialog Box