Luminex 100 IS User Manual, Version 2.1 - Manual (Page 115)

x MAP Technology Software Tour
PN 89-00002-00-070 Rev. A 7 - 51
3. Click Load Patient List. An Open Patient List File dialog box
appears.
Figure 83. Open Patient List File Dialog Box
4. Select a patient list text file to append to the batch and click
Open. The patients from that patient list append to the latest
batch. The rest of the list appends to the last well occupied with a
command.
If any of the acquire sample commands within the template of
the batch has any unassigned value, the system applies the first
patient ID in the list to the unassigned sample acquisition
command. The system appends any remaining patient IDs to the
end of the command list in order as they appear in the patient
list.
If all patient IDs in the batch or multi-batch are identified, the
system appends the patient list to the first empty location after
the batch’s or multi-batch’s last command list activity.
An assigned value is the patient label by which you recognize the
sample and might take the form of a barcode entry number you
scanned into the system or the sample ID entered manually.
5. Choose whether to save the batch or multi-batch for later use by
clicking Save only or to save the botch or multi-batch and load it
to run after you finish creating it by clicking Save and Load.
6. Click Finish. The system either saves the batch or multi-batch
for later use or it loads it for immediate use according to the
decision you made when creating it.