Luminex 100 IS User Manual, Version 2.1 - Manual (Page 18)

Luminex 100 IS User Manual Version 2.1 x MAP Technology
2 - 4 PN 89-00002-00-070 Rev. A
Figure 6. Luminex 100 Voltage Label (Uniphase)
The Luminex 100 analyzer has been tested by Underwriter
Laboratories, Inc® (UL).
This label appears on the back of the XYP instrument.
Figure 7. Luminex XYP Voltage Label
The XYP instrument has been tested by UL.
This system contains fluidics. In the event of a fluidic leak, turn off
all power to the system and disconnect all power cords. Remember
that the on/off switch is not a disconnect means, the power cord must
be removed from the outlet. Contact Luminex Corporation for further
information.
You must manually monitor waste levels—do not allow the waste
container to overflow! Empty the waste container each time the
sheath fluid container is filled. Do not place the waste container on
top of the instrument.