Luminex 100 IS User Manual, Version 2.1 User Manual

Page 2

© LUMINEX CORPORATION, 2001-2003. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, or translated into any language or computer language, in any form or by any means
without prior express, written consent of:

LUMINEX CORPORATION

12212 Technology Boulevard

Austin, Texas 78727-6115

U.S.A.

Voice: (512) 219-8020

Fax: (512) 219-5195

Luminex

100™ IS User Manual Version 2.1

CN-M011-01

PN 89-00002-00-070 Rev. A

January 2004

Luminex Corporation (Luminex) reserves the right to modify its products and services at any time. This guide
is subject to change without notice. Although prepared to ensure accuracy, Luminex assumes no liability for
errors or omissions, or for any damages resulting from the application or use of this information.

The following are trademarks of Luminex: Luminex 100, Luminex 100 IS, LabMAP, xMAP,
LumAvidin, Luminex XYP, Luminex FlexMAP, and Luminex SD. All other trademarks, including Windows,
Cheminert, Pentium, and Dell

are trademarks of their respective companies.

The Luminex 100 IS software uses the VideoSoft

VsFlexGrid Pro 7.0, VsPrinter 7.0, and VsView 3.0

ActiveX controls, which are copyrighted by VideoSoft, 2001.

The contents of this manual and the associated Luminex software are the property of Luminex and are
copyrighted. Except as specified in the End User License Agreement, any reproduction in whole or in part is
strictly prohibited.

REF

REP

Paul. A. Rowden
33 Stapleford Road
Middlesbrough
Cleveland TS39ES
England
([email protected])