Luminex 100 IS User Manual, Version 2.1 - Manual (Page 112)

100 IS S Users Manual Version 2.1 x MAP Technology
7 - 48 PN 89-00002-00-070 Rev. A
Figure 79. New Plate Added
2. Open the batch, as necessary.
3. Load the first plate for the batch.
4. Click Start Plate to begin processing the batch. When the initial
plate is through, the system pauses and displays a message in the
acquisition area prompting you to insert the new microtiter plate.
Figure 80. Insert Next Plate Warning
5. Load the next plate for the batch.
2
1
1. Insert New Plate Prompt 2. Resume Button