Luminex 100 IS User Manual, Version 2.1 - Manual (Page 19)

x MAP Technology Safety
PN 89-00002-00-070 Rev. A 2 - 5
Luminex 100 IS Laser
Classification
The Luminex 100 IS system classifies per FDA 21 CFR 1040.10 as a
Class II laser product consisting of a class I laser component
(Luminex 100 analyzer) and a Class II laser component (barcode
reader).
Luminex 100 Analyzer
Laser
United States and international regulations require the following
warnings to appear on the instrument during operation and
maintenance.
Figure 8. Laser Class Label
This label appears on the back panel of the Luminex 100 analyzer.
Figure 9. Laser Caution Label
Under NO circumstances should the user remove the instrument
cover! When routine maintenance is performed, power to the
instrument must be OFF and the power cord must be disconnected.
Warning: If biological samples have been tested with the
system, use your standard laboratory safety practices when
handling system waste.