CONTREX M-Traverse - Manual (Page 153)

5 - 6
Follower Position See Appendix C; MV-44.
Follower Profile Length See Appendix C; MV-84.
Fwd/Rev Limit Polarity See Appendix C; CP-36.
Gain See Appendix C; CP-65.
Hardwired Inputs that are wire shorted rather than using push buttons
or switches.
Home Offset See Appendix C; CP-31.
Home Sync Polarity See Appendix C; CP-35.
Input Monitoring Lead Frequency (MV-41)
Feedback Frequency (MV-42)
Discrete inputs, Group A (MV-53)
Discrete Inputs, Group B (MV-54)
Discrete Inputs, Group C (MV-55)
Inputs Input Power (J2 pins 1, 2,3)
Lead Frequency (J3 pins 3, 4, 5)
Feedback Frequency (J3 pins 7, 8, 9)
Home Sync (J3 pins 11, 12)
Setpoint Select A (J3 pins 13, 14)
Setpoint Select B (J3 pins 14, 15)
Home Set (J4 pins 14, 16)
Home Seek (J4 pins 1, 2)
Home Return (J4 pins 3, 4)
Batch Reset (J4 pins 4, 5)
Run (J4 pins 6, 7)
Wait (J4 pins 7, 8)
F-Stop (J4 pins 9, 10)
Keypad Lockout (J4 pins 10, 11)
Forward Limit (J4 pins 12, 13)
Reverse Limit (J4 pins 13, 14)
Jog Forward/Reverse (J4 pins 15, 16)
Jog (J4 pins 16, 17)
Integral See Appendix C; CP-66.
Invalid Profile See Appendix C; MV-58.
Jog Jog is used in conjunction with Home Set and Home Seek