CONTREX M-Traverse - Manual (Page 150)

5 - 3
GLOSSARY
Acceleration/Deceleration See Appendix C; CP-60.
Accel/Decel Length See Appendix C; CP-09.
Alarm - High Speed See Appendix C; CP-23.
Alarm Status See Appendix C; MV-51.
At-Home Band See Appendix C; CP-30.
Batch Count See Appendix C; MV-89.
Batch Format See Appendix C; CP-26.
Batch Limit See Appendix C; CP-27.
Batch Preact Distance See Appendix C; CP-28.
Baud Rate See Appendix C; CP-71.
Calibration Calibration matches the analog output of the M-Traverse
with the analog input of the motor drive.
Change Activation See Appendix C; CP-25.
Character Format See Appendix C; CP-72.
Closed loop A system that is controlled by manipulating the output based
on error (setpoint - feedback).
Closed Loop Compensation A mathematical term for a control algorithm that resolves
(PI) Software
the control error (feedback - setpoint) to zero.
Output = Kp X Error + K
I
∫
Error dt
PI represents “Proportional and Integral”.
Code Select Key This is the key that is used prior to entering a Parameter
Code (either a Control Parameter or a Monitor Variable).
Control Command Send The Control Command Send allows the host computer to
control the operating functions of the M-Traverse that are
associated with the Discrete inputs (F-Stop, Run, Home