CONTREX M-Traverse - Manual (Page 106)

3 - 59
MV-44 FOLLOWER POSITION
The Follower Position displays the distance of the Follower relative to the “Home”
position. This value is displayed in encoder lines.
MV-45 FOLLOWER POSITION - E.U.s
The Follower Position - E.U.s parameter converts the Follower Position (CP-44) into
Engineering Units.
MV-46 PRODUCT RATE
The M–Traverse calculates the cycle time for the last completed profile (in each
direction) and uses this to determine the Product Rate in profiles (layers) per minute.
MV-49 POSITION ERROR
The Position Error displays the difference between the current Follower position and the
commanded Follower position. It displays in Follower encoder lines. A positive value
indicates that the Follower is behind the commanded position (lagging) and a negative
value indicates that the Follower is ahead of the commanded position (leading).