Burkert Type 8630 - Manual (Page 89)

8630 - 87
O
PERATION AND
C
ONTROLLER
F
UNCTIONS
If the device is in the safety position (for the relevant configuration, see menu item BIN-IN
or SIG-ERR), SAFE XXX appears in the display.
If the menu item CUTOFF is activated and the process vave is in the tight-closing range,
a flashing MIN or MAX symbol appears in the display.
Display of the AUTOMATIC mode
With regard to the positioner, the following parameters can be displayed:
• Actual position of valve actuator POS__XXX (0 ... 100 %)
• Setpoint position of valve actuator after rescaling through optionally
activated split-range function or correction characteristic: CMD__XXX (0 ... 100 %)
• Input signal for setpoint position: INP__XXX
(0 ... 5/10 V or 0/4 ... 20 mA)
• Temperature inside housing of TOP Control Continuous TEMP_XX.X (in °C)
By pressing the arrow keys, you can switch between these 4 display options.
NOTE
(yellow LED flashes)
In the AUTOMATIC mode, normal controlled operation is executed and monitored.
Meaning of the keys in the AUTOMATIC mode:
Operating mode AUTOMATIC
No operating
action
AUTOMATIC mode
MANUAL mode
Release key
or
(> 5 sec.)
Switch over
display
Menu item
Configuration
END
Switch over the display
Change the process setpoint:
with configured supplementary functions
P.CONTRL / P.CO SETP / SETP INT
and display set to SP
or
or
> 3 s