Datamax-O'Neil Class Series II Programmer’s Manual - Manual (Page 75)

Extended System-Level Command Functions
Class Series 2 Programmer’s Manual 61
Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Menu Item (or Number)
(if available)
Command
Equivalent
Verifier Equipped
VE
A/Y, E, N/D
A or Y = Auto,
E = Enabled,
N or D = Disabled
Printer Options
KV
Verifier Type
VT
A, B, C, D
Reserved for future
use
N/A N/A
WiFi Security
(for firmware versions
13.99 and earlier. For
firmware versions 14.00
and later see Network
Setup parameter NE)
WS
A, K, S,
L, P, U
See Table 5-14. N/A N/A
WiFi Setup
(for firmware versions
13.99 and earlier. For
firmware versions 14.00
and later see Network
Setup parameter NE)
WE
A, C, F, I, L, M, N,
P, R, T, V, X See Table 5-13. N/A N/A
1. Commands are provided for backward compatibility on EX2. The KcQQQ command will respond with the new command equivalent; see
associated new commands.
2. The EX2 will accept display-equipped module IDs (D & G) as command parameters for upward compatibility; query commands will result in
printer responses with module IDs that are non-display compatible, providing backward compatibility.
3. Present distance changes for EX2 will only be accepted if the Stop Location (SL) is set to “Host.”
Table 5-1: Configuration Set Commands