Datamax-O'Neil Class Series II Programmer’s Manual - Manual (Page 125)

Extended System-Level Command Functions
Class Series 2 Programmer’s Manual 111
STX KQ Query Memory Configuration
This command causes the printer to transmit, in a model-dependent format, its memory
configuration (i.e., total amount installed, amount available for configuration, and
amount currently assigned to specific functions or entities) to the host device.
Syntax:
KQ
Non-Display model
response format:
INTERNAL MEMORY
VER: aa-cdd.ee mm/dd/yy
INSTALLED: iiii
AVAILABLE: vvvv
MODULE: X:xxxx
SCALABLE: ssss
LABEL MEM: LLLL
LABEL SIZE: wwww:gggg:oo
Where: - ASCII Carriage Return (0x0D) delimiter.
aa-cdd.ee mm/dd/yy
- ASCII string sequence that represents
the firmware version number string.
iiii
- The number of 4KB blocks of DRAM
memory.
vvvv
- The number of 4KB blocks of DRAM
available for configuration.
X: - ASCII character identifying a DRAM
module followed by an ASCII colon (:). If
no Internal Module is present, this field
and its associated legend will not appear.
xxxx
- The number of 4KB blocks of DRAM
allocated as an Internal Module.
ssss
- The number of 4KB blocks of DRAM
assigned to the smooth scalable font
processor cache.
LLLL
- The number of 4KB blocks of DRAM
assigned to label print buffer.
wwww
- Current maximum printable label width
(in 100 ths of an inch or millimeters).
gggg - Current printable length (in 100 ths of an
inch or millimeters), 200 min. / 640 max.
oo - Current label dimension unit’s
designation: “IN” for inches or “MM” for
millimeters.