Datamax-O'Neil Class Series II Programmer’s Manual - Manual (Page 158)

Label Formatting Command Functions
144 Class Series 2 Programmer’s Manual
Sample 2: Assume printer date is set to January 01, 2013
L
tD0005
121100001000100 Expiration Date:D GHI PQ,
RSTU <<<<
E
Prints: Expiration Date:JAN 06, 2013 <<<<
STX S Recall Global Data and Place in Field
This command, when in the format record data field, places data from a specified global
register into the data field. See the G command.
Syntax: Sn
Where: n - Specifies the global register (A P) that contains the
data to place into the data field.
Sample:
L
121100000000000DMX
G
1A2210001000000SA
E
The sample above places the string “DMX” into the next available
global register (A), and then line 4 is effectively replaced by the
data from global register A.
STX T Print Time and Date
This command, using string characters and markers, allows time and date data to be
selected and retrieved from the internal clock. In addition, the T may be preceded
by data to be printed/encoded, and/or the string may be terminated by an
command followed by more data then terminated. The string characters/markers
are not printed; instead, the label will show the corresponding print value.
Syntax: Tstring
Where:
string
- Is any set of characters, A - Z and a – h; see the
table below.