Atec Fluke-OF-500 - Manual (Page 62)

OF-500 OptiFiber Certifying OTDR
Users Manual
52
Changing the Connector Adapter
You can change the module's input connector adapter
(Figure 20) to connect to SC, ST, LC, and FC fiber
connectors. Additional adapter styles may be available.
Check the Fluke Networks web site for updates.
W
Caution
•
Cover all connectors with dust caps when not in
use.
•
Store extra connector adapters in the canisters
provided.
• Do not touch the photodiode lens (see Figure
21).
•
Do not overtighten the adapter or use tools to
tighten the adapter.
To install a connector adapter, refer to Figure 21and do
the following:
1 Locate the slot in the module connector and the key
on the adapter ring.
2 Holding the adapter so it does not turn in the nut,
align the adapter's key with the module connector's
slot and slide the adapter onto the connector.
3 Screw the nut onto the module connector.
amd37f.eps
Figure 20. SC, ST, LC, and FC Connector Adapters