Atec Fluke-OF-500 - Manual (Page 25)

Verifying Operation
15
ajt56f.eps
Figure 2. Removing the Module
Verifying Operation
The tester performs a basic self-test when you turn it on.
If the tester reports an error or does not turn on, refer to
“If Something Seems Wrong” on page 91.
The tester shows the model number of the installed
module in the upper-right corner of the screen. If the
screen shows No Module Installed, Problem with
Module, or The module needs a software update refer to
“If Something Seems Wrong” on page 91.