Atec Fluke-OF-500 - Manual (Page 101)

Calibration
91
Calibration
The tester requires a traceable calibration once a year to
ensure that it meets or exceeds the published accuracy
specifications. Contact an authorized Fluke Networks
Service Center for information on getting your tester
calibrated.
To see when the tester last received a traceable
calibration, press
E Version Info from the HOME
display.
If Something Seems Wrong
If something seems wrong with the tester, refer to
Table 2.
If the problem continues, refer to “Getting Help” below.
Tip: Online help is available for many error messages.
Press H when an error message appears to see
information about the error.
Getting Help
If Table 2 does not help you solve a problem with the
tester, contact Fluke Networks for additional help. If
possible, have the tester’s serial number, software and
hardware versions, and calibration date available. Press
E Version Info from the HOME display to see this
information.
For warranty information, refer to the warranty at the
beginning of this manual. If the warranty has lapsed,
contact Fluke Networks for repair prices.