Atec Agilent-E8364B - Manual (Page 130)

126
Specifications: Front-Panel Jumpers
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Models E8362B/C, E8363B/C, and E8364B/C Option 014
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
NOTE: The standard E8362/3/4A/B has no front-panel jumpers.
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Table 47: Measurement Receiver Inputs (Rcvr A In, Rcvr B In)
Description Specification Supplemental Information
Maximum Input Level
E8362B/C: Typical
45 MHz to 500 MHz -- -15 dBm, typical
500 MHz to 2 GHz -- -11 dBm, typical
2 GHz to 10 GHz -- -11 dBm, typical
10 GHz to 20 GHz -- -11 dBm, typical
E8363B/C:
45 MHz to 500 MHz -- -14 dBm, typical
500 MHz to 2 GHz -- -10 dBm, typical
2 GHz to 10 GHz -- -10 dBm, typical
10 GHz to 20 GHz -- -10 dBm, typical
20 GHZ to 30 GHz -- -14.5 dBm, typical
30 GHZ to 40 GHz -- -16.5 dBm, typical
E8364B/C:
45 MHz to 500 MHz -- - 14 dBm, typical
500 MHz to 2 GHz -- - 10 dBm, typical
2 GHz to 10 GHz -- - 10 dBm, typical
10 GHz to 20 GHz -- - 10 dBm, typical
20 GHZ to 30 GHz -- - 14.5 dBm, typical
30 GHZ to 40 GHz -- - 16.5 dBm, typical
40 GHZ to 45 GHz -- - 16 dBm, typical
45 GHZ to 50 GHz -- - 15 dBm, typical
Noise Floor
E8362B/C:
10 Hz IF Bandwidth
45 MHz to 500 MHz < -109 dBm --
500 MHz to 2 GHz < -130 dBm --
2 GHz to 10 GHz < -133 dBm --
10 GHz to 20 GHz < -135 dBm --
1 kHz IF Bandwidth
45 MHz to 500 MHz < -89 dBm --
500 MHz to 2 GHz < -110 dBm --
2 GHz to 10 GHz < -113 dBm --
10 GHz to 20 GHz < -115 dBm --