Atec Agilent-E8364B - Manual (Page 105)

101
Table 33 (Continued). Uncorrected System Performance
a
Crosstalk - Option 080 enabled
b,e
Typical:
10 MHz to 45 MHz -- -65
45 MHz to 1 GHz -- -85
1 GHz to 2 GHz -- -100
2 GHz to 10 GHz -- -109
10 GHz to 20 GHz -- -110
20 GHz to 40 GHz -- -106
40 GHz to 45 GHz -- -103
45 GHz to 50 GHz -- -98
a Specifications apply over environment temperature of 23°C +/- 3°C, with less than 1°C deviation from the calibration temperature.
b Typical performance.
c Transmission tracking performance is strongly dependent on cable used. These typical specifications are based on the use of the Agilent
thru cable (part number 85133-60016).
d Measurement conditions: normalized to a thru, measured with two shorts, 10 Hz IF bandwidth, averaging factor of 16, alternate mode,
source power set to the lesser of the maximum power out or the maximum receiver power.
e 0 Hz offset.