Atec Agilent-E8364B - Manual (Page 113)

109
Table 35 (Continued). Test Port Input
Direct Receiver Access Input Noise Floor
a,b
- Option 080 enabled
d
10 Hz IF Bandwidth
10 MHz to 45
MHz -- <-127 dBm -- <-127 dBm --
45 MHz to 500
MHz
c
-- <-126 dBm -- <-126 dBm --
500 MHz to 2
GHz -- <-132 dBm -- <-132 dBm --
2 GHz to
10 GHz
-- <-131 dBm -- <-131 dBm --
10 GHz to 20
GHz -- <-133 dBm -- <-133 dBm --
20 GHz to 40
GHz -- <-124 dBm -- <-124 dBm
40 GHz to 50
GHz -- <-122 dBm -- <-122 dBm
Option 016
degrades
performance by
2 dB.
1 KHz IF Bandwidth
10 MHz to 45
MHz -- <-107 dBm -- <-107 dBm --
45 MHz to
500 MHz
c
-- <-106 dBm -- <-106 dBm --
500 MHz to 2
GHz -- <-112 dBm -- <-112 dBm --
2 GHz to
10 GHz
-- <-111 dBm -- <-111 dBm --
10 GHz to
20 GHz
-- <-113 dBm -- <-113 dBm --
20 GHz to
40 GHz
-- <-104 dBm -- <-104 dBm
40 GHz to
50 GHz
-- <-102 dBm -- <-102 dBm
Option 016
degrades
performance by
2 dB.
Receiver Compression Level (Measured at Test Ports)
10 MHz to 20
GHz <0.1 dB at -5 dBm
g
and <0.45 dB at +5 dBm --
20 GHz to
30 GHz
<0.1 dB at -9.5 dBm
g
and <0.45 dB at 0 dBm --
30 GHz to
40 GHz
<0.1 dB at -12.5 dBm
g
and <0.45 dB at -3 dBm --
40 GHz to
50 GHz
<0.1 dB at -12.5 dBm
g
and <0.45 dB at -3 dBm --
System Compression Level
maximum output power See dynamic
accuracy table