Atec Agilent-E8364B - Manual (Page 109)

105
Table 34 (Continued). Test Port Output
1 MHz offset from center frequency, nominal power at test port - Option 080 enabled
Typical:
10 MHz to 10
GHz -- -- -- -- -103 dBc
10 GHz to 20
GHz -- -- -- -- -97 dBc
20 GHz to 50
GHz -- -- -- -- -85 dBc
Harmonics (2nd or 3rd)
-23 dBc typical,
in power range
0
Non-Harmonic Spurious (at Nominal Output Power)
10 MHz to 45
MHz -- -- -- -- -50 dBc typical,
for offset
frequency > 1
kHz
45 MHz to 20
GHz -- -- -- -- -50 dBc typical,
for offset
frequency > 1
kHz
20 GHz to 40
GHz -- -- -- -- -30 dBc typical,
for offset
frequency > 1
kHz
40 GHz to 50
GHz -- -- -- -- -30 dBc typical,
for offset
frequency > 1
kHz
a Test port output is a specification when the source is set to Port 1, and a characteristic when the source is set to Port 2.
b Typical performance.
c Preset power.
d Power Level Linearity is a specification when the source is set to Port 1, and a typical when the source is set to Port 2.
e Test port power is specified into nominal 50 ohms.
f Power to which the source can be set and phase lock is assured.
g +/-1.5 dB for power <= -23 dBm.
h E8362B/C only: Option H11 decreases maximum power level by 1 dB.
i E8362B/C only: Option H11 decreases maximum power level by 2 dB.
j E8362B/C only: Option H11 decreases power level by 1 dB.
k E8362B/C only: Option H11 decreases power level by 2 dB.
l Assumes no variation in time.
m Assumes no variation in temperature.