Atec Agilent-346a - Manual (Page 60)

60
Designing and Probing with Target Connections
Agilent Logic Analyzers with 90-pin Pod Connectors
Figure 10.2. Dimensions of the
100-Pin Samtec connector used in
the 16760-68702 and 16760-68703
connector kits
Figure 10.3. E5378A 100-pin single-ended probe dimensions
Figure 10.4. E5379A 100-pin differential probe dimensions
Figure 10.5. E5378A and E5379A input
equivalent load, including 100-pin
connector
Figure 10.7. E5380A input equivalent load,
including 38-pin connector
Equivalent Load
Equivalent Load
Figure 10.6. E5380A 38-Pin probe dimensions