Atec Agilent-346a - Manual (Page 18)

18
Designing and Probing with Target Connections
For All Agilent Logic Analyzers with 40-pin Pod Connectors
Probe Dimensions
The following figures show
dimensions, footprint, and pinout
information you will need to
design your target system board
for use with the Agilent Pro
Series soft touch probes.
Figure 5.3. E5404A probe dimensions
Figure 5.4. Pro Series soft touch retention module dimensions
Figure 5.5. Pro Series soft touch side-by-side dimensions
Probe and Retention Module
Dimensions
The following dimensions show
the Pro Series soft touch probe
attached to the retention module.
The retention module is mounted
on the PC board.
Top view E5404A
Side view E5404A