Atec Agilent-346a - Manual (Page 42)

42
E5405A Differential Pro Series Soft
Touch Connectorless Probe
The E5405A is a 17-channel
differential Pro Series soft touch
connectorless probe compatible
with all Agilent logic analyzers
that have a 90-pin pod connector.
It is capable of acquiring data at
the maximum rates of the logic
analyzer it is connected to.
Features
• No connector on the
target board
• Top-side retention module
• Industry-standard
connectorless footprint
• 17 channels, differential or
single-ended clock and data
• Extremely low, <0.7 pF,
equivalent load capacitance
• Capable of data rates >2.5 Gb/s
(maximum rate dependent on
analyzer used)
• 200 mV Vmax–Vmin minimum
signal amplitude
• Robust and reliable soft
touch technology
Unused clock inputs can be used
as data inputs.
The E5405A uses the same reten-
tion module as the E5404A and
E5406A Pro Series soft touch
connectorless probe.
A kit of five retention modules is
shipped with each Pro Series soft
touch probe. Additional kits can
be ordered using Agilent part
number E5403A.
Designing and Probing with Target Connections
Agilent Logic Analyzers with 90-pin Pod Connectors
E5406A Pro Series Soft Touch
Connectorless Probe
The E5406A is a 34-channel
single-ended Pro Series soft touch
connectorless probe compatible
with all Agilent logic analyzers
that have a 90-pin pod connector.
It is capable of acquiring data at
the maximum rates of the logic
analyzer it is connected to.
Features
• No connector on the
target board
• Top-side mount retention
module
• Industry-standard
connectorless footprint
• 34 channels, single-ended
or differential clock and
single-ended data
• Extremely low, <0.7 pF,
equivalent load capacitance
• Capable of data rates >2.5 Gb/s
(maximum rate dependent on
analyzer used)
• 250 mV p-p minimum
signal amplitude
• Robust and reliable soft
touch technology
Unused clock inputs can be used
as data inputs.
The E5406A (used with logic
analyzers with a 90-pin cable con-
nector) uses the same footprint,
pinout, and retention module as
the E5404A Pro Series soft touch
connectorless probe (used with
logic analyzers with a 40-pin
cable connector.
A kit of five retention modules is
shipped with each Pro Series soft
touch probe. Additional kits can
be ordered using Agilent part
number E5403A.
E5387A Differential Soft Touch
Connectorless Probe
The E5387A is a 17-channel
differential soft touch connector-
less probe compatible with all
Agilent logic analyzers that have
a 90-pin pod connector. It is
capable of acquiring data at the
maximum rates of the logic
analyzer it is connected to. The
probe has the following inputs:
• 16 differential or single-ended
data inputs
• one differential or single-ended
clock input
• < 0.7 pf input capacitance
• 200 mV V
max
–V
min
minimum
signal amplitude
Unused clock inputs can be used
as data inputs.
The E5387A uses the same reten-
tion module as the E5390A and
E5394A soft touch probes.
A kit of five retention modules
is shipped with each soft touch
probe. Additional kits can be
ordered using Agilent part
number E5387-68701.