Atec Agilent-346a - Manual (Page 27)

27
Designing and Probing with Target Connections
For All Agilent Logic Analyzers with 40-pin Pod Connectors
High Density, High Performance
Agilent Technologies has
developed high-density probing
solutions based on the 100-pin
Samtec and AMP Mictor 38-pin
connectors. The Agilent probes
and adapter cables, E5346A,
E5339A, E5351A, and E5385A
provide a connection strategy to
route your important signals to
the Agilent logic analyzer. Simply
design the connectors onto the
board for the critical signals such
as address, data, and status bits.
The connectors consume a minimal
amount of board space. Each
connector provides 32 channels
of logic analysis per connector
and two clocks (unused clocks
can be used as data). Connectors
for use with the E5385A, E5346A,
E5339A and E5351A can be
purchased directly from AMP,
Samtec, or Agilent Technologies.
See the “Related Information” at
the end of this document.
0.450 in
11.44 mm
17.500 in
444.50 mm
0.465 in
11.80 mm
0.209 in
5.31 mm
0.271 in
6.89 mm
1.400 in
35.56 mm
1.100 in
27.94 mm
2.393 in
60.77 mm
1.64 in
41.6 mm
Figure 5.17. E5346A, E5351A, E5339A mechanical dimensions
Figure 5.16. E5385A 100-pin probe mechanical dimensions