Atec Agilent-346a - Manual (Page 17)

17
Figure 5.2. Agilent E5394A soft touch probe connection
Pads and mounting
holes on target system
Retention module
E5394A
single-ended
soft touch probe
Logic analyzer probe cables
(40-pin pod connector)
Designing and Probing with Target Connections
For All Agilent Logic Analyzers with 40-pin Pod Connectors
E5394A Soft Touch
Connectorless Probe
The E5394A is a 34-channel
single-ended soft touch connec-
torless probe compatible with all
Agilent logic analyzers that have
a 40-pin pod connector. It is
capable of acquiring data at the
maximum rates of the logic
analyzer it is connected to. The
probe has the following inputs:
• 32 single-ended data inputs
• two single-ended clock inputs
• < 0.7 pf input capacitance
• 500 mV p-p minimum signal
amplitude
Unused clock inputs can be used
as data inputs.
The E5394A (used with logic
analyzers with a 40-pin pod con-
nector) uses the same footprint,
pinout and retention module as
the E5390A single-ended soft
touch connectorless probe (used
with logic analyzers with a 90-pin
pod connector).
A kit of five retention modules
is shipped with each soft touch
probe. Additional kits can be
ordered using Agilent part
number E5387-68701.
E5396A Half-Size Soft Touch
Connectorless Probe
The E5396A is a small space
saving probe compatible with all
Agilent logic analyzers that have
a 40-pin cable connector. It is a
17-channel, single-ended probe
capable of capturing data at
the maximum rates of the logic
analyzer it is connected to. The
probe has the following inputs:
• 16 single-ended data inputs
• one single-ended clock input
• <0.7 pf equivalent load
capacitance
• 500 mV p-p minimum signal
amplitude
The unused clock input can be
used as a data input.
The E5396A (used with logic
analyzers with a 40-pin cable con-
nector) uses the same footprint,
pinout, and retention module as
the E5398A single-ended soft
touch connectorless probe (used
with logic analyzers with a 90-pin
cable connector).
More information about soft
touch connectorless probes
is available on the web at
www.agilent.com/find/softtouch.