Atec Agilent-346a - Manual (Page 22)

22
Designing and Probing with Target Connections
For All Agilent Logic Analyzers with 40-pin Pod Connectors
E5404/06A 34-Channel
Single-Ended Probe
Logic Analyzer
Signal Name Pad # Channel Pod
D0 A1 ➞ 0 Whichever pod
D1 A2 ➞ 1
is connected to
Ground A3
“Odd” on the
D4 A4 ➞ 4
E5404/06A
D5 A5 ➞ 5
probe
Ground A6
Clock 1+ A7 ➞ Clock
GND/NC/Clock 1– A8
Ground A9
D10 A10 ➞ 10
D11 A11 ➞ 11
Ground A12
D14 A13 ➞ 14
D15 A14 ➞ 15
Ground A15 Whichever pod
D2 A16 ➞ 2
is connected to
D3 A17 ➞ 3
“Even” on the
Ground A18
E5404/06A
D6 A19 ➞ 6
probe
D7 A20 ➞ 7
Ground A21
D8 A22 ➞ 8
D9 A23 ➞ 9
Ground A24
D12 A25 ➞ 12
D13 A26 ➞ 13
Ground A27
E5404/06A 34-Channel
Single-Ended Probe
Logic Analyzer
Signal Name Pad # Channel Pod
Ground B1 Whichever pod
D2 B2 ➞ 2
is connected to
D3 B3 ➞ 3
“Odd” on the
Ground B4
E5404/06A
D6 B5 ➞ 6
probe
D7 B6 ➞ 7
Ground B7
D8 B8 ➞ 8
D9 B9 ➞ 9
Ground B10
D12 B11 ➞ 12
D13 B12 ➞ 13
Ground B13
D0 B14 ➞ 0 Whichever pod
D1 B15 ➞ 1
is connected to
Ground B16
“Even” on the
D4 B17 ➞ 4
E5404/06A
D5 B18 ➞ 5
probe
Ground B19
GND/NC/Clock 2– B20
Clock 2+ B21 ➞ Clock
Ground B22
D10 B23 ➞ 10
D11 B24 ➞ 11
Ground B25
D14 B26 ➞ 14
D15 B27 ➞ 15