Atec Agilent-81618A - Manual (Page 88)

Cleaning Information
88
Agilent 81618A/9A and Agilent 81622B/3B/4B/6B/7B/8B User’s Guide, Second Edition
The following Cleaning Information contains some general safety
precautions, which must be observed during all phases of cleaning.
Consult your specific optical device manuals or guides for full
information on safety matters.
Please try, whenever possible, to use physically contacting connectors,
and dry connections. Clean the connectors, interfaces, and bushings
carefully after use.
If you are unsure of the correct cleaning procedure for your optical
device, we recommend that you first try cleaning a dummy or test
device.
Agilent Technologies assume no liability for the customer’s failure to
comply with these requirements.