Atec Agilent-81618A - Manual (Page 39)

Test Failure Performance Tests
Agilent 81618A/9A and Agilent 81622B/3B/4B/6B/7B/8B User’s Guide, Second Edition
39
Test Failure
If the Agilent 81618A/19A Interface module or Agilent
81622B/3B/4B/6B/7B/8B Optical Head fails any performance test,
return the instrument to the nearest Agilent Technologies
Sales / Service Office for repair.
Instrument Specification
Specifications are the performance characteristics of the instrument
that is certified. These specifications, listed in “Specifications” on
page 21, are the performance standards or limits against which the
Agilent 81622B/3B/4B/6B/7B/8B Optical Head can be tested.
“Specifications” on page 21 also lists some supplemental
characteristics of the Agilent 81622B/3B/4B/6B/7B/8B Optical Head.
Supplemental characteristics should be considered as additional
information.
Agilent 81618A/19A Interface Modules are tested for functionality
only.
Any changes in the specifications due to manufacturing changes,
design, or traceability to the National Institute of Standards and
Technology (NIST), will be covered in a manual change supplement, or
revised manual. Such specifications supercede any that were
previously published.