Atec Agilent-81618A - Manual (Page 14)

Getting Started with Optical Heads What is an Optical Head?
14
Agilent 81618A/9A and Agilent 81622B/3B/4B/6B/7B/8B User’s Guide, Second Edition
Figure 5 Attaching the Bottom Part of the Heat Sink
3 Attach the upper part of the heat sink to the integrating sphere.
Slide the upper part over the connector adapter with the largest
diameter facing opposite to the sphere. Tighten the screws with the
Allen key enclosed in the Heat Sink Kit (see Figure 6).
Figure 6 Attaching the Upper Part of the Heat Sink