Atec Agilent-81618A - Manual (Page 40)

Performance Tests Functional Tests
40
Agilent 81618A/9A and Agilent 81622B/3B/4B/6B/7B/8B User’s Guide, Second Edition
Functional Tests
The functional test applies to the Agilent 81618A/19A Interface
modules.
Figure 9 Functional Test Setup
1 Set up the equipment as shown in Figure 9
2 If you are using an Agilent 81619A Interface module connect one
optical head to channel 1 and the other to channel 2
3 Power up the mainframe.
If the Agilent 81618A/19A passes all self-tests, the module is
considered fully functional.
Mainframe 8163A/B with
8161xA Interface Module as DUT