Atec Agilent-81618A - Manual (Page 4)

Safety Considerations
4
Agilent 81618A/9A and Agilent 81622B/3B/4B/6B/7B/8B User’s Guide, Second Edition
Agilent Technologies Deutschland GmbH will not be liable for any
damage caused by operation above 34 dBm.
Initial Inspection
Inspect the shipping container for damage. If there is damage to the
container or cushioning, keep them until you have checked the
contents of the shipment for completeness and verified the instrument
both mechanically and electrically.
The Performance Tests give procedures for checking the operation of
the instrument. If the contents are incomplete, mechanical damage or
defect is apparent, or if an instrument does not pass the operator’s
checks, notify the nearest Agilent Technologies Sales/Service Office.
W A R N I N G To avoid hazardous electrical shock, do not perform electrical tests
when there are signs of shipping damage to any portion of the outer
enclosure (covers, panels, etc.).
Line Power Requirements
The Agilent 81618A and Agilent 81619A Optical Head Interface
Modules operate when installed in the Agilent 8163A Lightwave
Multimeter, Agilent 8164A Lightwave Measurement System, and
Agilent 8166A Lightwave Multichannel System.
Operating Environment
The safety information in the Agilent 8163A Lightwave Multimeter,
Agilent 8164A Lightwave Measurement System, and Agilent 8166A
Lightwave Multichannel System User’s Guide summarizes the
operating ranges for the Agilent 81618A and Agilent 81619A Optical
Head Interface Modules. In order for these modules to meet
specifications, the operating environment must be within the limits
specified for the Agilent 8163A Lightwave Multimeter, Agilent 8164A
Lightwave Measurement System, and Agilent 8166A Lightwave
Multichannel System.
Storage and Shipment
This module can be stored or shipped at temperatures between
−40°C and +70°C. Protect the module from temperature extremes that
may cause condensation within it.