Atec Agilent-81618A - Manual (Page 2)

2
Agilent 81618A/9A and Agilent 81622B/3B/4B/6B/7B/8B User’s Guide, Second Edition
Notices
This document contains proprietary information that is
protected by copyright. All rights are reserved.
No part of this document may be reproduced in any form
or by any means (including electronic storage and
retrieval or translation into a foreign language) without
prior agreement and written consent from Agilent
Technologies Deutschland GmbH as governed by United
States and international copywright laws.
 Copyright 2000 by:
Agilent Technologies Deutschland GmbH
Herrenberger Str. 130
71034 Böblingen
Germany
Subject Matter
The material in this document is subject to change without
notice.
Agilent Technologies makes no warranty of any kind
with regard to this printed material, including, but not
limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Agilent Technologies shall not be liable for errors
contained herein or for incidental or consequential
damages in connection with the furnishing, performance,
or use of this material.
Printing History
New editions are complete revisions of the guide
reflecting alterations in the functionality of the instrument.
Updates are occasionally made to the guide between
editions. The date on the title page changes when an
updated guide is published. To find out the current
revision of the guide, or to purchase an updated guide,
contact your Agilent Technologies representative.
Warranty
This Agilent Technologies instrument product is
warranted against defects in material and workmanship
for a period of one year from date of shipment. During the
warranty period, Agilent will, at its option, either repair or
replace products that prove to be defective.
For warranty service or repair, this product must be
returned to a service facility designated by Agilent. Buyer
shall prepay shipping charges to Agilent and Agilent shall
pay shipping charges to return the product to Buyer.
However, Buyer shall pay all shipping charges, duties, and
taxes for products returned to Agilent from another
country.
Agilent warrants that its software and firmware designated
by Agilent for use with an instrument will execute its
programming instructions when properly installed on that
instrument. Agilent does not warrant that the operation of
the instrument, software, or firmware will be
uninterrupted or error free.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting
from improper or inadequate maintenance by Buyer,
Buyer-supplied software or interfacing, unauthorized
modification or misuse, operation outside of the
environmental specifications for the product, or improper
site preparation or maintenance.
No other warranty is expressed or implied. Agilent
Technologies specifically disclaims the implied warranties
of Merchantability and Fitness for a Particular Purpose.
Exclusive Remedies
The remedies provided herein are Buyer’s sole and
exclusive remedies. Agilent Technologies shall not be
liable for any direct, indirect, special, incidental, or
consequential damages whether based on contract, tort, or
any other legal theory.
Assistance
Product maintenance agreements and other customer
assistance agreements are available for Agilent
Technologies products. For any assistance contact your
nearest Agilent Technologies Sales and Service Office.
Certification
Agilent Technologies Inc. certifies that this product met its
published specifications at the time of shipment from the
factory.
Agilent Technologies further certifies that its calibration
measurements are traceable to the United States National
Institute of Standards and Technology, NIST (formerly the
United States National Bureau of Standards, NBS) to the
extent allowed by the Institutes’s calibration facility, and
to the calibration facilities of other International
Standards Organization members.
ISO 9001 Certification
Produced to ISO 9001 international quality system
standard as part of our objective of continually increasing
customer satisfaction through improved process control.
Second Edition:
81623-90B12
Second Edition:
81623-90B12
January 2002
First Edition:
81623-90044
July 2001