Vnd 200 dvi-i — decoder only, Functional overview, Encoder source compatibility – Extron Electronics VN-Matrix 200 Series User Manual
Page 8
VND 200 DVI-I — Decoder Only
The VND 200 is a decoder-only device and is compatible with other VN-Matrix products
including the VNM Enterprise Controller and the VNC 200 configured as a controller.
The VND 200 does not support:
•
Mouse and keyboard operation
•
RS-232 client / server operation
Decoder
12V DC
5A MAX
POWER
1 — LAN — 2
IN
OUT/
LOOP
AUDIO
SPDIF
REMOTE
TO PC
IN
IN
DVI-I
OUT/LOOP
RS-232
OVER LAN
Figure 3.
VND 200 DVI-I, Decoder — Back Panel
Functional Overview
Device Name
Part Number
Standard Features
Optional Features
by License
VNC 200 DVI-I
60-1117-01
Codec, video, keyboard
and mouse, output scaling,
RS-232
Whiteboard and data
support
VNC 200 DVI-A 60-1118-01
Codec, video, audio,
keyboard and mouse,
output scaling, RS-232
Whiteboard and data
support
VNE 200 DVI-I
60-1119-01
Encoder, video, audio
None
VND 200 DVI-I
60-1120-01
Decoder, video, audio,
output scaling
None
The VNC 200 can be configured to operate in one of two modes:
•
As an encoder to encode a source and stream it across a network
•
As a decoder to decode and display a VNC 200 data stream from a network
Any VNC 200 matrix system will contain at least two devices, one configured as an
encoder and the other as a decoder. Multiple encoders and decoders may co-exist on the
same network.
Encoder Source Compatibility
As an encoder, the VNC 200 is compatible with digital (DVI) and analog (RGB) graphic
sources up to WUXGA (1920 x 1200) resolution (see “
” for a list of
standard supported sources).
The VNC 200 incorporates advanced image acquisition circuitry which can auto-detect a
wide range of source types without the need for any additional setup.
For special or non-standard source formats, user-customizable source modes can be
created using the web interface (see “
” for further details).
NOTE: The VNC 200 provides analog-to-digital or digital-to-analog conversion via its
monitor connections. Therefore, it is possible to use a digital monitor with an
analog source and vice versa.
VN-Matrix 200 Series • Introduction
3