Network, Communications setup, Network communications setup – Extron Electronics VN-Matrix 200 Series User Manual
Page 20: Operating systems, Vnc 200
Network Communications Setup
To establish a serial communication link…
1.
Using a null modem serial cable, connect the serial port of a PC or laptop to the
Remote serial port on the VNC 200 to be configured.
12V DC
5A MAX
POWER
1 — LAN — 2
IN
OUT/
LOOP
AUDIO
SPDIF
REMOTE
TO PC
IN
IN
DVI-I
OUT/LOOP
RS-232
OVER LAN
VNC 200
Power
Source
PSU
Figure 10.
Establishing a Serial Communication Link
2.
On the PC or laptop, run a terminal emulation program such as HyperTerminal with
the following comm settings:
Baud rate:
115200
Data bits:
8
Parity: None
Stop bits:
1
Flow control:
None
NOTE: HyperTerminal is supplied with most Windows
®
operating systems.
VN-Matrix 200 Series • Installation
15
This manual is related to the following products: