Extron Electronics VN-Matrix 200 Series - Manual (Page 38)

Advanced setup options
The encoder set up procedure on the preceding pages will achieve a basic level of
operation which will be adequate for most normal applications.
The following advanced setup options are possible.
Fine-tuning of input parameters See “ Fine-tuning a Source (Manual
Overrides) ”
Creation of custom input modes See “ Creating a custom input mode ”
Changing video compression See “ Managing Compression and
Bandwidth Settings ”
Managing bandwidth usage See “ Bandwidth Management Settings ”
Changing audio compression See “ Audio Compression ”
Configuring a VNC 200 as a Decoder (Display)
The following procedure assumes that at least one VNC 200 encoder has been configured
and is ready to stream a source (see “
Configuring a VNC 200 as an Encoder (Source) .”
It is also assumed that a suitable display device is connected to the VNC 200. For details
on how to connect a display, see “
Setup Connection Procedure .”
NOTE: This procedure provides a basic level of configuration which will be adequate
for most systems. For additional advanced setup options, see “ Additional
Information for Decoder Setup ”.
Figure 26. Configuring a VNC 200 as a Decoder
a
On the Device List page click the device that you want to configure as shown in the
above image. The Device page will then appear.
VN-Matrix 200 Series • System Configuration 33