Extron Electronics VN-Matrix 200 Series - Manual (Page 57)

To Terminate a Remote Control Session Using Hot Keys
Using the keyboard attached to the VN 200 decoder or encoder, press the
key twice, followed by the key.
Both the source monitor and display monitor will briefly show MK:Local in the top
left-hand corner as shown here.
MK:Local MK:Local MK:Local MK:Local
Mouse and Keyboard Control
1. Login to the web interface (see “ System Configuration ”).
2. From the Device List page click on the required encoder device.
3. From the Device page click the Peripherals tab to display the following:
Figure 39. Peripherals Page
VN-Matrix 200 Series • Remote Keyboard and Mouse Operation 52