Extron Electronics VN-Matrix 200 Series - Manual (Page 117)

Serial Port Login Procedure
1. From the Login: prompt, type config followed by the key.
2. When prompted for a password, type config followed by the key.
The following menu will then appear.
Network Port 1 Network Port 2
============== ==============
0. Speed/Duplex: auto_10_100_1000 10. Speed/Duplex: auto_10_100_1000
1. Boot method: static [dhcp] 11. Boot method: static [dhcp]
2. address: 192.168.0.1 12. address: 192.168.1.1
3. netmask: 255.255.255.0 13. netmask: 255.255.255.0
4. gateway: 192.168.0.1 14 Gateway: 192.168.0.1
5. broadcast: 15. broadcast:
6. mtu: 1500 16. mtu: 1500
7. controller ip: 192.168.0.18 17. ip forwarding: 0
8. controller port: 5432 18. webserver port: 80
9. Exit
3. Type the menu option number required followed by the key.
4. Where required, type the new value followed by the key.
5. To exit the menu and return to the main command prompt, type 9 followed by the
key.
Command options
The following commands are also supported from the main command prompt:
Exit To logout from the session
Reboot To force the VN 200 device to restart
Ping To test network communications with another device (see
“
Understanding Network Performance ”)
VN-Matrix 200 Series • Technical Data 112