Reference information, Specifications – Extron Electronics VN-Matrix 200 Series User Manual
Page 119
Reference
Information
Specifications
Video input
Number/signal type ........................ 1 DVI-I: analog RGBHV, RGsB, HDTV component video
(progressive, interlaced) or single link digital DVI (DVI-D)
Connectors .................................... 1 female DVI-I
Nominal level ................................. 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels .............. Analog: 0.0 V to 1.0 Vp-p with no offset
Impedance ..................................... 75 ohms
Resolution range ............................ 640x480 to1600x1200, 1920x1200 (with reduced
blanking) @ 23.97 Hz to 85 Hz
Also 525i, 625i, 720p, 1080i, 1080p
Standards ....................................... DVI 1.0
Video processing
Digital sampling ............................. 24 bit, 8 bits per color, 165 MHz standard
Colors ............................................ 16.78 million
Compression .................................. PURE3
™
Codec
Frame rate delay ............................. 35 ms (70 ms encoding/decoding)
Bit rate ........................................... 1 Mbps to 200 Mbps
Bit and frame rate control .............. Selectable
Frame rate ...................................... Up to 60 fps @ 1080p
Video output
Number/signal type ........................ 1 DVI-I: analog RGBHV, RGsB, or single link digital DVI
(DVI-D); follows input or is scaled
Connectors .................................... 1 female DVI-I
Nominal level ................................. 0.7 Vp-p for RGB
Minimum/maximum levels .............. 0.0 V to 1.0 Vp-p
Impedance ..................................... 75 ohms
Scaled resolution ............................ 640x480 to1600x1200, 1920x1200 (with reduced
blanking) @ 23.97 Hz to 85 Hz
Also 525i, 625i, 720p, 1080i, 1080p
Scan mode ..................................... Follow mode: output follows input
Scale mode: set to match the resolution and frame rate of
the local display
Sync
Input type ...................................... RGBHV, RGsB, bi-level component video
Output type ................................... RGBHV
Input level ...................................... 2.75 V to 5.0 Vp-p for RGBHV
0.3 Vp-p for RGsB or component video bi-level sync
VN-Matrix 200 Series • Reference Information
114