Extron Electronics VN-Matrix 200 Series - Manual (Page 122)

Accessories
Supplied Accessories
In addition to this User Guide, the VNC 200 is supplied with the following accessories. If
any of these items are missing or damaged, please contact your Extron dealer immediately:
Part Description Qty Re-order Code
12 V Power Supply Unit (PSU) 1 70-761-01
Power Cord for PSU (with 3-pin ‘Edison’ plug)
— For use in the USA. 1 27-044-01LF
Digital Monitor Cable (2 meter DVI-D to DVI-D) 1 26-535-01
Analog Monitor Cable (2 meter 15-pin HD-type to DVI-A) 1 26-540-01
DVI-A to 15-pin HD Adapter 1 26-589-01
Mouse and Keyboard Cable (2 metre PS/2 to PS/2) 2 27-727-01LF
Serial Cable (9-pin D-type to 9-pin D-type) 1 27-699-01LF
Optional Accessories
The following optional accessories are also available for use with the VNC 200. Order
these from your Extron dealer:
Part Description Order
Code
VNM Dual RMK
• A kit that allows two VNC 200 units to be installed in a 19 inch
equipment rack. Full instructions are included with the kit.
60-1130-
01
VNM Quad RMK
• A kit that allows four VNC 200 units to be installed, side by side, in a
19 inch equipment rack. Full instructions are included with the kit.
60-1131-
01
VNM MBU
• A kit that allows an VNC 200 unit to be mounted to any convenient flat
surface, such as under a desk. Full instructions are included with the kit.
60-1132-
01
VNM 12PSR
• A 12 way redundant power supply system, for use when rack mounting
multiple units.
70-762-01
VN-Matrix 200 Series • Reference Information 117