Extron Electronics VN-Matrix 200 Series - Manual (Page 61)

Video Setup Page
All advanced source setup is achieved via the Video Setup page. To access the Video Setup
page, follow the numbered steps in the diagram below. Click on the
Video Setup tab on
the Configure (videoPort) page for the relevant VNC 200 encoder.`
1
22
33
Figure 40. Video Setup
For most source types it is recommended that you select auto from the mode drop-down
menu, allowing full auto-detection of the source.
To apply a fixed input mode, select the required mode from the
mode drop-down list and
click Update or the Save All tab.
NOTE: Selecting a fixed input mode disables the auto-detect function.
VN-Matrix 200 Series • Advanced Setup Procedures 56