Extron Electronics IPI 200 Series User Guide - Manual (Page 64)

SIS Programming and Control, cont’d
IPI 100 and IPI 200 Series • SIS Programming and Control B-6
X1# = Local date and time format
Set format (MM/DD/YY‑HH:MM:SS).
Example: 01/18/05-10:54:00.
Read format (day of week, date month year HH:MM:SS).
Example: Tue, 18 Jan 2005 18:19:33.
X1$ = IP address or subnet mask (xxx.xxx.xxx.xxx). Leading zeros in each of four
fields are optional in setting values, and they are suppressed in returned
values.
IPI’s default address: 192.168.254.254
Default broadcast address: 255.255.255.255.
X1* = Hardware (MAC) address (xx‑xx‑xx‑xx‑xx‑xx) (00‑05‑A6‑xx‑xx‑xx)
X2@ = Verbose/response mode status:
0 = clear/none, default for Telnet connections; responses are not echoed to
the host
1 = verbose mode is on, default for RS‑232 host control; responses are echoed
to the host and displayed to the user
2 = send tagged responses for queries
3 = verbose mode is on and tagged responses are sent for queries
N If tagged responses are enabled, all read commands return the constant string +
data, the same as for setting a value. For example, for E CN } , the response
is Ipn• X1@ ] rather than just the data.
X3# = Password (minimum length = 4 characters, maximum length = 12 characters,
no special characters are allowed)
N A user password cannot be assigned if no administrator password exists; the E14
error code will be returned. If the administrator password is cleared, then the
user password is also removed.
X3$ = Daylight saving time
0 = Daylight Saving Time off/ignore
1 = Daylight Saving Time on (USA/Canada)
2 = Daylight Saving Time on (Europe)
3 = Daylight Saving Time on (Brazil)
X4! = Password to display on screen (response to password query or set). When
the MLC connects to a host device via RS‑232, the password ( X3# ), itself, is the
response. When the connection is via IP, X4! is 4 asterisks (****) if a password
has been assigned, or it is an empty field ( ) if a password hasn’t been
assigned.
X4( = Default name: a combination of the model name and the last 3 pairs of the
IPI 200 series’ MAC address
X5@ = Connection’s security level
11 = user
12 = administrator
X6# = Pulse time in 20 ms per count. If this parameter is missing or = 0, then pulse
length = default = 25 = 500 ms. 1 = 20 ms (minimum pulse time) to 65535 =
1310700 ms (maximum pulse time).