Extron Electronics IPI 200 Series User Guide - Manual (Page 39)

5-5 IPI 100 and IPI 200 Series • HelpDesk Software
Configuring the IP Intercom System
This section takes you through the step‑by‑step procedures for carrying out certain
basic tasks. The examples in this chapter specifically describe the IPI 204 devices
but apply to all IP Intercom models.
For information about more advanced setup and configuration, consult the
IP Intercom HelpDesk help file. Click the Help option in the Help menu or press F1
from within the HelpDesk program.
Basic Configuration
Using the Configuration Utility
1. In the Tools menu, select Configuration Utility. The first time the utility is used
after opening the program a password pop‑up box appears. Enter a password
in the pop‑up box that opens. The default password is extron (all lower case
letters).
2. The Configuration Utility window opens:
3.
Create a list of intercom devices. This can be done by
• Importing a .gc2 or .gcz (Global Configurator) file
• Entering IP addresses manually
• Automatically by scanning the local subnet
Use the drop‑down menu to select the appropriate option.