Extron Electronics IPI 200 Series User Guide - Manual (Page 10)

Preface
IPI 100 and IPI 200 Series • Preface 1-2
About this Manual
This manual describes how to configure and operate the following Extron
MediaLink ™ IP Intercom ® Modules:
• IPI 101 AAP
• IPI 104 AAP
• IPI 201 Series
• IPI 204 Series
N The IPI 201 and IPI 204 series include AAP and 2-gang version intercoms.
Terms and symbols used in this manual
The following terms are used throughout the manual and carry the following
meanings:
• The terms “IPI” and “intercom” are used interchangeably in this manual
to refer to all models.
• The term “100 Series” refers to both the IPI 101 and IPI 104.
• The term “200 Series” refers to both the IPI 201 models (AAP or 2‑gang
version) and both the IPI 204 models.
• The term “console” refers to a PC that is running the IP Intercom
HelpDesk ™ software and is connected to one or more IPI Intercom
Systems (MLC 226 IP with IPI 104/101 AAP or stand‑alone IPI 201/204
AAP or 2‑gang models) via a local area network.
• “MLC” refers to an MLC 226 IP MediaLink Controller.
• “WAV” refers to a Waveform audio file, which has a “.wav” file
extension.
The following symbols are used in this manual and have the following meanings:
N A Note icon draws attention to important information.
C A Caution icon warns of things that might damage the equipment.
T A Tip provides a suggestion to make setting up or working with the device easier.
W A Warning icon warns of things that might cause injury, death, or other
severe consequences.
D
A Dangerous icon is intended to alert the user of the presence of
uninsulated dangerous voltage within the product’s enclosure that may
present a risk of electric shock.
I
A Important icon warns of important operating and maintenance
(servicing) instructions in the literature provided with the equipment.