Group announcement, Group announcement -11 – Extron Electronics IPI 200 Series User Guide User Manual
Page 45
5-11
IPI 100 and IPI 200 Series • HelpDesk Software
6.
Press and hold the intercom button. It turns to a high amber color and the Mic
On LED lights green. On the PC monitor, the Listen button is activated, the
“Incoming Call Alert” indicator flashes, and two audible signals of different
frequencies are heard at the intercom.
7.
Release the intercom button. It turns to a low amber color and the Mic On LED
turns off.
Group announcement
1.
Decide which IP devices on the Active Intercom List you wish to group
together. Select each device one at a time and use the Group drop‑down menu
to assign all of them to the same group.
N
Each device on the Active
Intercom List can only
belong to one group.
2.
Click the Group
Announcement
button.
3.
The Group Selection pane
becomes visible. Groups
that are available are listed
in black text; groups that are
not available are grayed out.
Select an available group or All
Intercoms
.
4.
The selected button turns
green and the intercom
devices belonging to that
group are highlighted in the
Active Intercom List.
5.
Activate the Talk mode (
). When you have finished
talking inactivate the Talk
see step 4 of Talk Mode on page 5‑9
or
Click the Play Sound Bite. A
list of available sound bites
appears. (For information
about managing the Sound
Bites list, see
) Select the sound
bite and click on the Play to
Intercom(s)
button. The
button turns green and
the text is changed to Stop
Playing
.
6.
When the sound bite has
finished playing, click on the
Exit
button.
7.
Close the Group Selection pane by clicking on the Exit button.