Xylem DH-21 - Manual (Page 93)

DH-21
Using the Graphical “W ATER LOG” Software 4-47
Paper Orientation:
The two options here are portrait and landscape.
Auto Form Feed:
When this option is selected, the printer will issue a form feed after the graph has been
printed. Some printers will not print the last page until it gets a form feed, so the data for
the graph will be in the printers buffer but will not print until you force a form feed. This
option will cause the printer to print the graph by automatically adding a form feed at the
end of the graph data. If this option is on and the printer sends out a blank page, then this
option may need to be turned off.
These options normally only need to be set once. When these options are redisplayed, they
should be the same as the last time they were used. However, when entering this screen the
options should be checked to make sure they are correct.
Figure 4-30. Print Options