Xylem DH-21 - Manual (Page 37)

DH-21
Using the “W ATER LOG” Software 3-19
The WaterLOG Serial # T2000 Version 1.1
Status = RUN (VARIABLE) Last Measurement Units
Date/Time = 02/28/95 04:07:17
Date Started = 02/28/95 04:00:00 PRESSURE = -0.0052 PSI
Logging Rate = 00:01:00 TEMPERATURE = 78.07 Deg F
Next Log Time = 04:07:55
Memory Used = 0.1 %
Logging Count = 15 Scans
Battery = 6.8 Volts
1) Run 4) Time/Date 7) User Notes 10) Measure Data
2) Off 5) Logging Mode 8) Extract Data 11) Zero Sensor
3) Reset 6) Coefficients 9) View Data 12) Sensor Info
13) Diagnostics
Enter Option: 2 Esc-Exit
Off
This will stop the sensor logging.
Continue? y (y/n)
Esc-Exit
Figure 3-14. Stop Logging Option
3.2.8 Extract Data Option
You will use the Extract Data option to retrieve the data stored in the FLASH EEPROM of the
“
W ATER LOG” using option number 8 as shown in Figure 3-15. You can choose to transfer all
the data stored in the “ W
ATER LOG” or transfer only the new data stored since the previous
download.
The WaterLOG Serial # T2000 Version 1.1
Status = OFF (VARIABLE) Last Measurement Units
Date/Time = 02/28/95 04:07:59
Date Started = 02/28/95 04:00:00 PRESSURE = -0.0052 PSI
Logging Rate = 00:01:00 TEMPERATURE = 78.07 Deg F
Next Log Time = 04:07:55
Memory Used = 0.1 %
Logging Count = 15 Scans
Battery = 6.8 Volts
1) Run 4) Time/Date 7) User Notes 10) Measure Data
2) Off 5) Logging Mode 8) Extract Data 11) Zero Sensor
3) Reset 6) Coefficients 9) View Data 12) Sensor Info
13) Diagnostics
Enter Option: 8 Esc-Exit
Extract Data
1) Extract ALL Data 2) Extract NEW Data
Enter Option: 1 Esc-Exit
Figure 3-15. Extract Data Option