GE Industrial Solutions Galaxy Vector Controller GCM3 - Manual (Page 97)

Galaxy Vector Controller GCM2, GCM3
Issue 4 January 2008 T1.317 Objects and Attributes Appendix B - 5
Table B-12: Slope Thermal Compensation
Related Commands
OBJ,ATTR DESCRIPTION STA CHA OPE TYPE RANGE OF VALUES
sc1,stt State
√ √
number 0:disable 1:enable
sc1,rve Raise voltage enable
√ √
number 0:disable 1:enable
sc1,ltt Lower temperature
√ √
number -5-20:0°C
sc1,ntt Nominal temperature
√ √
number 15-30:25°C
sc1,utt Upper temperature √ √ number 30-55:45°C
sc1,spt Step temperature threshold √ √ number 45-85:75°C
sc1,lsp Lower temperature slope
per cell
√ √
number 1-5:3mV/°C
sc1,usp Upper temperature slope
per cell
√ √
number 1-5:3mV/°C
Table B-13: Call-Out
Related Commands
OBJ,ATTR DESCRIPTION STA CHA OPE TYPE RANGE OF VALUES
p1,phn Primary phone number
√ √
text Up to 25 characters:“”
a1,phn Alternate phone number
√ √
text Up to 25 characters:“”
Table B-14: Serial Ports
Related Commands
OBJ,ATTR DESCRIPTION STA CHA OPE TYPE RANGE OF VALUES
mp1,bdr Modem baud rate √ √ number 1200,2400,4800,9600, and 19200
mp1,ins Modem initialization string
√ √
text Up to 25 characters: “at&fev&c1h0”
mp1,hsh Modem handshaking
√ √
text “NO”: none
“SW”: xon and xoff
mp1,nrg Modem number of rings
before answering
√ √
number 1 - 9 rings
lp1,bdr Local RS-232 baud rate
√ √
number “AUTO”,1200,2400,4800,9600,
and 19200
lp1,hsh Local RS-232 handshaking √ √ text “NO”: none
"SW": xon and xoff
"HW": cts and rts