Grain Systems Tanks PNEG-1460 - Manual (Page 63)

12. Hopper Assembly
PNEG-1460 6', 7' and 9' Bulk Feed Tank BFT Series and GHT Series 63
9' 60° Leg Attachment (for 9' 60° Tanks Only)
Curved washers are supplied in the hardware packages. These washers must be installed at the bottom
leg to sidewall bolt connection, to the inside of the hopper panel as shown in
Figure 12C .
Apply caulking between the hopper panel and the sidewall sheet.
Figure 12C
Ref # Part # Description
A S-7484 Hex Nut 5/16"-18 JS Grade 5
B BLK-12483 10 Gauge Curved Washer
C S-10260 5/16" x 1" Bin Bolt
D Hopper Panel
E Sidewall Sheet
Leg